P.02 — Sectors

We work where precision matters.

Extrusion, coating, anodising and industrial maintenance. Four areas with very different critical points and the same requirement: keeping the line producing within tolerance.

Aluminium profile leaving the extrusion press
FIG. 01 — ALUMINIUM EXTRUSION38°59'N 1°51'W
Aluminium profile leaving the extrusion press
FIG. 02 — ALUMINIUM EXTRUSION

01 / 04 — Sector

Aluminium extrusion

The press concentrates most of the wear in the plant: container, stem, dummy blocks, discs, tie rods and bolsters work at high temperature in continuous cycles. PAFER supplies the tooling and wearing parts, as well as hydraulics, log heaters and handling table components.

Tooling and wearing partsDie correctionHydraulicsLog and die heatersHandling tableLubricants and release agentsAuxiliary machinery
Critical point: dummy block and container

See solutions

Frequently asked questions

[[PENDIENTE: validate questions and answers]]

We work from the dimensions and drawings of your press. With the manufacturer’s reference, a drawing or the main dimensions we can propose an equivalent container, stem, dummy blocks or die holders.

Press model and tonnage, container diameter, a drawing or photo of the part and, if possible, the number of cycles or the service life of the current part.

Yes. It is one of the on-site technical services we provide, because misalignment shortens tooling life and affects profile quality.

Aluminium profiles in the coating booth during painting
FIG. 03 — POWDER COATING

02 / 04 — Sector

Powder coating

In a coating plant, the quality of the finish depends on filtration, overhead conveying and thermal control. PAFER covers the filtering elements of the cleaning unit, painting booth and pre-heating tunnel, as well as the conveyor chain, hooks, bar supports and gearboxes.

Filtering elementsPainting boothPre-heating tunnelChain and hooksRadiant and catalytic panelGearboxes
Critical point: overhead conveyor chain

See solutions

Frequently asked questions

[[PENDIENTE: validate questions and answers]]

It depends on operating hours and the type of powder. We help you set an interval based on pressure drop and the condition of the filters in your plant.

Yes, based on the chain pitch, the load per point and the geometry of the profiles being hung.

Yes. We inspect and repair the coating line, including the cleaning unit, booth and conveyor.

Aluminium profiles leaving the tanks of an anodising line
FIG. 04 — ANODISING AND FILTERING

03 / 04 — Sector

Anodising and filtering

Anodising requires components that withstand an aggressive chemical environment and keep the bar’s electrical contact. PAFER supplies bar hooks and components for both the anodising line and the associated filtering systems.

Bar hooksFiltering systems
Critical point: bar hook contact

See solutions

Frequently asked questions

[[PENDIENTE: validate questions and answers]]

It depends on the bath and the working current. Tell us the process and load size and we will propose the right option.

Yes. PAFER works with customers in 49 markets across Europe, Africa, the Middle East, Asia, Oceania and the Americas.

Technician working on the electrical cabinet of an industrial line
FIG. 05 — INDUSTRIAL MAINTENANCE

04 / 04 — Sector

Industrial maintenance

Beyond supplying spare parts, PAFER works on the installation itself: mechanical checks, container and stem alignment, ultrasonic testing, hydraulic service, furnace repair with flow adjustment, automation adjustments and control revamping on the extrusion line.

AlignmentUltrasonic testingFurnacesAutomationControl revampingAPS
Critical point: cylinders and hydraulic circuit

See technical service

Frequently asked questions

[[PENDIENTE: validate questions and answers]]

Mark it as “line stopped” in the technical service form: this is what allows us to prioritise the intervention.

Yes, we offer maintenance for a single machine or for the whole installation: mechanical, hydraulic, furnaces and coating.

Inspection of the equipment and its wearing parts, with a report on the points that require intervention.

05 — How we work

From the problem to the solution.

The same procedure in all four sectors: understand the equipment before proposing the part.

  1. 01

    We analyse

    We understand the customer’s technical need: equipment, application and working conditions.

  2. 02

    We advise

    We select the right solution for the application, on technical grounds rather than catalogue availability.

  3. 03

    We supply

    We provide the component, spare part or assembly within a reasonable lead time.

  4. 04

    We assist

    Our technical team intervenes on site whenever the installation requires it.

06 — Contact

Which sector do you need support in?

Tell us the process and the equipment and we will reply with a specific technical proposal.

Next — P.03 Solutions View page