PAFER technician measuring an aluminium extrusion die

SolutionsforExtrusion

Spare parts, components and specialist technical service for aluminium extrusion, powder coating and anodising equipment.

ALBACETE, ES — 38°59'N 1°51'W
20+ YEARS · 49 MARKETS · 12 PRODUCT AREAS

01 / 09 — Manifesto

Keeping a press running is a matter of precision, of time, and of knowing exactly which part will fail before it does. We have been doing it for the aluminium industry for more than twenty years.

— PAFER TECHNICAL TEAM, ALBACETE About PAFER

From the world to Albacete: 49 international markets

+20Years of experience
12Product areas
03Extrusion · Coating · Anodising
49International markets
See the 49 markets

Europe 19

Albania · Germany · Austria · Belgium · Bosnia and Serbia · Bulgaria · Cyprus · Croatia · Slovakia · Slovenia · France · Greece · Hungary · Ireland · Lithuania · Netherlands · Poland · United Kingdom · Romania

Africa 04

Angola · Algeria · Egypt · Tunisia

Middle East 08

Saudi Arabia · Bahrain · United Arab Emirates · Israel · Jordan · Lebanon · Qatar · Syria

Asia 02

India · Uzbekistan

Oceania 02

Australia · New Zealand

Americas 14

Argentina · Colombia · Costa Rica · Cuba · Ecuador · El Salvador · United States · Honduras · Mexico · Paraguay · Puerto Rico · Dominican Republic · Uruguay · Venezuela

02 / 09 — Company

More than 20 years solving technical needs for the aluminium industry.

Soluciones Técnicas PAFER S.L. is a family company formed by a technical team with more than 20 years of experience in the aluminium extrusion industry, highly qualified and trained to meet your needs.

We offer the full range of products and services required to maintain your equipment quickly and economically: spare parts for extrusion, powder coating and anodising equipment, within reasonable lead times and at competitive prices, without compromising quality.

Our experience allows us to offer personal technical advice so that you choose the most suitable product for the application, as well as specific maintenance services — mechanical, hydraulic, furnaces or coating — for a single machine or for the whole installation.

PAFER spare parts warehouse in Albacete
FIG. 02 — SPARE PARTS WAREHOUSE · ALBACETE
01

Product

Twelve spare-part and component areas for extrusion, coating and anodising equipment.

02

Experience

More than 20 years in the industry, working with extrusion groups inside and outside Spain.

03

Advice

Technical selection of the part according to equipment, application and working conditions.

04

Technical service

Checking, repair and commissioning of equipment on site.

About PAFER

03 / 09 — The process

From billet to profile.

  1. FIG. 04.1 — BILLET
    01 / 05

    Billet

    Every profile starts here: an aluminium billet that has to be moved, cut and fed to the line without a single stop.

  2. FIG. 04.2 — FURNACE
    02 / 05

    Furnace

    The billet is heated evenly to its working temperature. A furnace that fails stops the press.

  3. FIG. 04.3 — PRESS
    03 / 05

    Press

    The hydraulic press pushes the metal with enormous force. Every seal, every valve and every wearing part counts.

  4. FIG. 04.4 — DIE
    04 / 05

    Die

    The aluminium passes through the die and takes its shape. This is where the profile tolerance is decided.

  5. FIG. 04.5 — PROFILE
    05 / 05

    Profile

    The profile comes out, cools, is stretched and cut to length. Ready for coating or anodising.

04 / 09 — Sectors

We work where precision matters.

Every process has its own critical points. These are the four areas where PAFER contributes with product, advice and technical service.

  1. 01Aluminium extrusion

    Press tooling, wearing parts, hydraulics, log heaters and handling table components. Everything needed to keep the press running within tolerance.

    Tooling and wearing parts / Hydraulics / Log and die heater / Handling table / Die correction

    See solutions
    Aluminium profile leaving the extrusion press
    FIG. 05 — ALUMINIUM EXTRUSION
  2. 02Powder coating

    Filtering elements, overhead conveying and heating for coating plants: from the cleaning unit and painting cabinet to the chain, hooks and gearboxes.

    Filtering elements / Chain and hooks / Radiant and catalytic panel / Gearboxes

    See solutions
    Aluminium profiles in the coating booth during painting
    FIG. 05 — POWDER COATING
  3. 03Anodising and filtering

    Components for anodising lines and their associated filtering systems, such as bar hooks.

    Bar hooks / Filtering systems

    See solutions
    Aluminium profiles leaving the tanks of an anodising line
    FIG. 05 — ANODISING AND FILTERING
  4. 04Industrial maintenance

    Mechanical checks, container and stem alignment, ultrasonic testing, hydraulic service, furnaces, automation and control revamping on the extrusion line.

    Alignment / Ultrasonic testing / Hydraulics / Furnaces / Automation

    See technical service
    Technician working on the electrical cabinet of an industrial line
    FIG. 05 — INDUSTRIAL MAINTENANCE

05 / 09 — Products

Twelve spare-part areas. One single partner.

Supply within reasonable lead times, at competitive prices and with the technical advice to choose the right part.

01 / 12

Die Correction Parts

Measuring and die-correction tooling, work benches and hardness-control equipment for aluminium profiles.

Die correctionDimensional controlHardness control
Die Correction Parts
Details
02 / 12

Log and Die Heater

Cast spares plus combustion and control components for log heating ovens, as well as ageing ovens and complete log furnaces.

Log heatingDie heatingAgeing
Log and Die Heater
Details
03 / 12

Hydraulics

Hydraulic components for presses and auxiliary extrusion equipment: valves, cylinders and inner parts, filtration and sealing.

Extrusion pressAuxiliary equipmentHydraulic maintenance
Hydraulics
Details
04 / 12

Tooling and Wearing Parts

Press tooling and wearing parts: container, die holder, tie rods, stems, dummy blocks, bolsters and rings.

Extrusion pressTooling changeWearing parts
Tooling and Wearing Parts
Details
05 / 12

Mould Release Agents and Lubricants

Mould release agents and oils for the extrusion process and cutting lines.

ExtrusionDiesCutting saws
Mould Release Agents and Lubricants
Details
06 / 12

Handling Table

Contact elements and consumables for the handling and cooling table, plus saw blades.

Lead-out tableProfile handlingCutting
Handling Table
Details
07 / 12

Personal Safety

Personal protective equipment for handling hot material on extrusion lines.

Press exitHot handlingFurnaces
Personal Safety
Details
08 / 12

Standard Spares

Standard spare parts commonly used on extrusion, powder coating and anodizing lines.

ExtrusionPowder coatingAnodizing
Standard Spares
Details
09 / 12

Repairs and Handling Table Extensions

Handling table extensions and repair of log ovens and cylinders, on site and with our own technical staff.

  1. 01Handling table extensions
  2. 02Log oven repairs
  3. 03Cylinder repairs
Details
10 / 12

Anodizing and Filtering

Components for anodizing lines and their associated filtering systems.

AnodizingFilteringSurface treatment
Anodizing and Filtering
Details
11 / 12

Powder Coating

Filtering elements and conveying and heating components for aluminium powder coating plants.

Painting cabinetPreheating tunnelOverhead conveyor
Powder Coating
Details
12 / 12

Auxiliary Machinery and Other Devices

Die splitting and coupling machines and lubrication systems for press and saw.

Die shopPressSaw
Auxiliary Machinery and Other Devices
Details

06 / 09 — Technical advice

The right part, chosen on technical grounds.

Our more than 20 years of experience in the industry allow us to offer you personal technical advice to choose the most suitable product for your needs and the application.

  1. 01Analysis of the equipment and its operating conditions.
  2. 02Part selection based on the application.
  3. 03Alternatives when the original reference is no longer available.
Illustrative technical drawing of the cross-section of a thermally broken aluminium window profile, with dimensions.

07 / 09 — Technical service

When the line stops, every hour counts.

PAFER does not only supply the part: we check, repair and commission the equipment on site, with our own technical staff.

  1. 01

    Diagnosis

    We identify the source of the fault on site.

  2. 02

    Inspection

    We check the condition of the critical components.

  3. 03

    Repair

    We replace or repair with the right part.

  4. 04

    Commissioning

    We leave the equipment running within tolerance.

Request technical service

Mechanical maintenance / Hydraulic / Furnaces / Coating

08 / 09 — Vision

From Albacete, for the aluminium industry worldwide.

EUROPE, AFRICA, MIDDLE EAST, ASIA, OCEANIA, AMERICAS

They trust PAFER

[[PENDIENTE: authorised client or manufacturer logos]]

Certifications

[[PENDIENTE: certifications (ISO or other)]]

09 / 09 — Contact

Let’s talk about your plant.

ALBACETE · CET

Technical reply within 24 working hours. [[PENDIENTE: confirm response commitment]]

With international code, e.g. +44 20 0000 0000
Enquiry type
Process
PDF, JPG or PNG · max. 10 MB
Optional. A drawing, reference or photo of the part speeds up the reply.

Required fields *

Controller: Soluciones Técnicas PAFER S.L.. Purpose: to handle your enquiry. Legal basis: your consent. Rights: access, rectification, erasure and the others set out in the privacy policy.